Is your TP-Link wireless repeater not connecting to internet? Well, you might be facing this issue due to a number of reasons. Some of them include:
- Technical glitches
- Outdated or crashed firmware
- Too much distance between repeater and router
- Unstable Ethernet connection
- Internet Service Provider at fault
- WiFi interference
Regardless of the reason why your TP-Link repeater is refusing to connect to the internet, following the below-mentioned troubleshooting hacks will surely help you resolve the issue.
Fixed: TP-Link Repeater Not Connecting to Internet
Reboot Your TP-Link Repeater
As mentioned earlier, technical glitches are one of the many reasons why your TP-Link repeater is refusing to connect to the internet. To get rid of these glitches, you must reboot your wireless device.
Here is how you can give your repeater a fresh start:
- Disconnect your TP-Link repeater from the existing router.
- Power off your repeater and unplug it from its electrical outlet.
- Wait for a couple of seconds.
- Therefore, plug your TP-Link repeater back into its electrical outlet.
- Press the Power button.
- Do not forget to reconnect your repeater to the host router.
Now, try to access http tplinkrepeater net. Are you able to? If not, then it means that you are still caught up with the internet issue.
Verify the Ethernet Connection
Have you used an Ethernet cable to connect your TP-Link wireless repeater and your home router? Well, that is where you went wrong. If your cable has cuts or is damaged, it will obviously impact the performance of your device.
Therefore, either get the cable you are currently using replaced with a new one or connect your devices with the help of a wireless source.
Bring Your WiFi Devices Closer
Apart from ensuring a stable connection between your TP-Link repeater and your home router, you need to make sure that the distance between them is not more than required. The reason being, too much distance between your devices can make it difficult for them to communicate properly.
Therefore, keep in mind that your TP-Link wireless repeater is placed in the same room as that of your home router.
Contact Your Internet Service Provider
Chances are your Internet Service Provider is not doing his job properly. To confirm the same, it is recommended that you get in touch with him.
Does he agree that the internet issue is from his end? Yes? Well, in that case, give him a couple of hours to get the issue resolved.
Now, try to access the login page of your repeater using the TP Link app. Did you get lucky?
Avoid WiFi Interference
If your TP-Link repeater is still refusing to connect to the internet, it is probably because its signals are getting interrupted or blocked.
To troubleshoot the issue, change the location of your repeater and make sure that it is not placed anywhere near the following things:
- Cordless phones
- Washing machines
- Baby monitors
- Bluetooth speakers
- Microwave ovens
- Fish tanks
- Aluminums studs
Additionally, do not place your wireless repeater in corners or near thick concrete walls.
Reset Your TP-Link Repeater
Are you still going bonkers because of the TP-Link repeater not connecting to internet issue? In that case, your last resort is to perform factory default reset.
Follow the guidelines mentioned below and learn how to restore your WiFi repeater to the factory default settings:
- Locate the Reset hole on your TP-Link repeater.
- Take an oil pin or a paper clip and carefully insert it in the Reset hole.
- Wait for a few seconds.
In some time, your TP-Link wireless repeater will get restored to the factory default settings. Now, you need to set up your device from scratch.
Note: Whether you have performed TP Link AC750 setup or configured any other extender model in your home, you will find the setup steps in the user manual.
With that, we wrap our guide to troubleshoot the TP-Link repeater not connecting to the internet issue. We hope that after following the hacks mentioned above, you will surely be able to connect your device to the internet in a hassle-free manner.
Did you like walking through this article? Whether the answer is a yes or no, do share your feedback in the comment section.